Base for 1CH CP3100

Base for 1CH CP3100
  • Base for 1CH CP3100

An exclusive base made up of the CP300 Series converter power source, input and output terminal areas, etc.
When using this device, make sure to use it together with the CP3000 Series converter.

Inquiry
Download contents

Products in the same category

  • (V/mA) DC Converter CP3004

    (V/mA) DC Converter CP3004

    Converts DC voltage or DC current signal into various DC current signals for output.
    This is an insulator output V/mA signal converter.

  • Alarm Setter CP3005

    Alarm Setter CP3005

    Compares DC current or DC voltage signal with alarm set point and outputs relay ON/OFF signal.
    This is an insulator 2-point output alarm setter.

  • Distributor CP3007

    Distributor CP3007

    Supplies power to 2-wire type transmitter and converts a 4 to 20 mA signal into insulated 1 to 5 V DC for output.
    This is an insulator output distributor.

  • Frequency Converter CP3008

    Frequency Converter CP3008

    Inputs pulse signal and converts frequency into DC signal for output.
    This is an insulator output frequency converter.