PAC28 Series (Single Phase)

PAC28 Series (Single Phase)
  • PAC28 Series (Single Phase)

Source frequency 50/60 Hz automatically discernible
Control circuit power supply can be 100 V to 240 V to support a wide supply voltage range.
Two types of main power supply: 100 V to 240 V and 240 V to 480 V
Analogue auxiliary input with insulation is optional; ramping can be set by remote signal.
Standard heater break alarm as standard feature (not available for variable resistive loads)
Operation control and output monitoring by communication function (optional)
Output voltage range: 0 to 98% (not including thyristor forward voltage drop [1 to 2 V])
CE marking compliant / rated current up to 100 A (main supply voltage: 100 V to 240 V)Employs a noise filter to comply with EMC standards.
September 2026, sales scheduled to end for 300A and 450A

Inquiry
Download contents

Products in the same category

  • PAC11P Series (Single Phase)

    PAC11P Series (Single Phase)

    Achieves a slim width with a compact integrated structure, and can increase the panel mounting density.
    With frequency switching
    Current Capacity: 20 to 60 Amperes
    The power adjustment function can be used. [Current input type: internal (standard equipment), contact input type: external]
    RoHS directive supported

  • PAC15 Series

    PAC15 Series

    The power regulator is featured with a small, lightweight and space saving design.
    Ideal for controlling heating element with constant change in resistance per temperature characteristic.
    The regulator may be used ignoring any output noise effect under cycle base zero voltage switching control system.

  • PAC26P Series (Single Phase)

    PAC26P Series (Single Phase)

    For phase control system, soft start function (variable within 1 to 10 sec.) is available.
    Widely coping with various applications such as control of heater having alloy, graphite, silicon carbide or pure metal system as its heating element by joint use with current control function or various feedback functions and matching transformer.

  • PAC27P Series (UL-C/US, CE Single Phase)

    PAC27P Series (UL-C/US, CE Single Phase)

    For phase control system, constant voltage feedback control is equipped as standard.
    Space saving type single-phase power regulator with a wide selection of additional optional functions available.
    Control achieved under joint use with matching transformer is also available for various usages such as control of heater having alloy, graphite, silicon carbide or pure metal system as its heating element.
    *2 Application of CE marking is also available by jointly using the regulator with designated noise filter.
    September 2027, sales scheduled to end