Dummy Converter CP3090
Dummy converter is for use of CP3200, without using a converter, to fill empty space.
Electrically, it has no function at all, but it prevents clogging up by dust, etc., of the socket of the CP3200's empty terminal.
Products in the same category
-
Alarm Setter CP3005
Compares DC current or DC voltage signal with alarm set point and outputs relay ON/OFF signal.
This is an insulator 2-point output alarm setter. -
Distributor CP3007
Supplies power to 2-wire type transmitter and converts a 4 to 20 mA signal into insulated 1 to 5 V DC for output.
This is an insulator output distributor. -
Frequency Converter CP3008
Inputs pulse signal and converts frequency into DC signal for output.
This is an insulator output frequency converter. -
Base for 1CH CP3100
An exclusive base made up of the CP300 Series converter power source, input and output terminal areas, etc.
When using this device, make sure to use it together with the CP3000 Series converter.
- 2-30-10, Kitamachi, Nerima-Ku, Tokyo 179-0081
- TEL：03-3931-7891
- FAX：03-3931-3089