Duct-Mounted Temperature/Humidity Sensor TH20

TOP > Introduction of products > Digital Controller > Digital Controller > Discontinued Product SR32/33 Series
Duct-Mounted Temperature/Humidity Sensor TH20
  • Duct-Mounted Temperature/Humidity Sensor TH20

This is a duct-mounted type temperature/humidity sensor for general type air conditioning.
The measuring part has mesh work which gives it excellent responsiveness.
Measuring range is 0 to 50 °C, 20 to 90% RH.
Measuring accuracy is ±0.5 °C (at 10 to 40°C), ±3% RH (at 40 to 80% RH).

Inquiry
Download contents

Products in the same category

  • Duct-Mounted Temperature/Humidity Sensor TH60

    Duct-Mounted Temperature/Humidity Sensor TH60

    Has excellent moisture-resistant structure, and has a wide range of uses.
    Small and light, its use is space-saving.
    Measuring range is 0 to 50 °C, 20 to 95% RH.
    Measuring accuracy is ±0.5 °C (at 10 to 40 °C),
    ±3% RH (at 25 °C, 40 to 80% RH).

    Discontinued in September 2018

  • STD

    STD

    This thermocouple can be customized if the specifications in the standard product TD series do not match.
    If selection of product specifications is difficult, based on your application, our company can do the product encoding for you.
    For protective tube, we not only have metal tubes that have excellent mechanical strength, but also non-metallic tubes that are strong in the high-temperature range.
    Protective tubes are not only straight, but we can also accept bending work according to your specification (only for metal tubes).
    Protective tube size and compensating lead wire material and length can be customized.
    We accept specifications on compensating lead wire terminal processing, such as Y terminal, round terminal, or no-terminal.
    We can install a metal connector in the middle portion of the compensating lead wire to enable you to uncouple it.
    We also have double protective tubes for those who require higher strength.

  • SRD

    SRD

    This RTD can be customized if the specifications in the standard product RD series do not match.
    If selection of product specifications is difficult, based on your application, our company can do the product encoding for you.
    For protective tube, we not only have SUS that has excellent corrosion and heat resistance, but also one that is strongly resistant to chemicals.
    Protective tubes are not only straight, but we can also accept bending work according to your specification (only for metal tubes).
    Protective tube size and compensating lead wire material and length can be customized.
    We accept specifications on compensating lead wire terminal processing, such as Y terminal, round terminal or no-terminal.
    We can install a metal connector in the middle portion of the compensating lead wire to enable you to uncouple it.
    We also have double protective tubes for those who require higher strength.

  • T71A

    T71A

    This is a wall-mounted type temperature/humidity sensor for general type air conditioning.
    Small and light, this can easily be installed.
    Measuring range is 0 to 50 °C, 20 to 90% RH.
    Measuring accuracy is ±0.3 °C, ±3% RH (at 25 °C, 20 to 90% RH).