Inputs pulse signal and converts frequency into DC signal for output.
This is an insulator output frequency converter.
Compares DC current or DC voltage signal with alarm set point and outputs relay ON/OFF signal.
This is an insulator 2-point output alarm setter.
Supplies power to 2-wire type transmitter and converts a 4 to 20 mA signal into insulated 1 to 5 V DC for output.
This is an insulator output distributor.
An exclusive base made up of the CP300 Series converter power source, input and output terminal areas, etc.
When using this device, make sure to use it together with the CP3000 Series converter.
An exclusive base made up of the CP300 Series converter power source, input and output terminal areas, etc.
When using this device, make sure to use it together with the CP3000 Series converter.