Distributor CP3007

Supplies power to 2-wire type transmitter and converts a 4 to 20 mA signal into insulated 1 to 5 V DC for output.
This is an insulator output distributor.

Products in the same category

  • Alarm Setter CP3005

    Alarm Setter CP3005

    Compares DC current or DC voltage signal with alarm set point and outputs relay ON/OFF signal.
    This is an insulator 2-point output alarm setter.

  • Frequency Converter CP3008

    Frequency Converter CP3008

    Inputs pulse signal and converts frequency into DC signal for output.
    This is an insulator output frequency converter.

  • Base for 1CH CP3100

    Base for 1CH CP3100

    An exclusive base made up of the CP300 Series converter power source, input and output terminal areas, etc.
    When using this device, make sure to use it together with the CP3000 Series converter.

  • Base CP3200 for 8 CH/16 CH

    Base CP3200 for 8 CH/16 CH

    An exclusive base made up of the CP300 Series converter power source, input and output terminal areas, etc.
    When using this device, make sure to use it together with the CP3000 Series converter.