Distributor (Non-Isolation between Input and Output) CP3737

TOP > Introduction of products > Converter > CP3700 Series > Distributor (Non-Isolation between Input and Output) CP3737
Distributor (Non-Isolation between Input and Output) CP3737
  • Distributor (Non-Isolation between Input and Output) CP3737

The CP3737 is a slim plug-in Distributor that powers a two-wire transmitter, converts its 4 to 20mA signals into commonly used DC signals, and provides a dual output. This model has no isolation between the input and output, providing a low-cost design. (The unit includes a transmitter power ON/OFF switch.)

Inquiry
Download contents

Products in the same category

  • Alarm Setter CP3705

    Alarm Setter CP3705

    Compares DC current or DC voltage signal with 2 set points (higher and lower limits) and outputs relay ON/OFF signal.>br>This is an insulator 2 point output alarm setter.

  • Distributor CP3707

    Distributor CP3707

    Supplies power to various 2-wire type transmitters, converts feedback loop 4?20 mA signal into various DC signals for output.
    This is an insulator output distributor.

  • Potentiometer Converter CP3710

    Potentiometer Converter CP3710

    Detects resistance value change in potentiometer, converts it into various DC signals for output.
    This is an insulator output potentiometer converter.

  • CT AC-DC Signal Input Converter CP3720

    CT AC-DC Signal Input Converter CP3720

    Converts AC current signal from CT (regulator) into various DC signals for output.
    This is an insulator output CT converter.